Universal Fire Stop
Universal Fire Stop FS-700
Commercial/Industrial/Residential
Superior fire stop- Putty like compound for electrical, plumbing and cabeling holes.
- Prevents fire and smoke penetration.
- Class “A” Fire Stop caulk for penetration holes.
APPLICATIONS: COMMERCIAL, INDUSTRIAL AND RESIDENTIAL FIRE STOP, FIRE BLOCK
Applications: Commercial, Industrial, and Residential Fire Stop, Fire Block
- Fire Rated Class “A”.
- Specifically formulated for maximum protection.
- Acts as a heat and flame shield.
- One gallon and 5 gallon containers.
- Used as a firestop for holes created to install cabling, electrical, plumbing and other wall penetrations.
- An exclusive formula, flame, heat and smoke inhibiting organic putty fire stop.
- An exclusive compound, putty, sealant and caulking material.
- Specifically formulated for maximum protection against fire and smoke pass through, used anywhere penetration holes and cracks for fire safety is required.
- Interior applications, meets and exceeds the Class I, Class II, UL 1479, ASTM E-814, and NFPA 255 for surface burning characteristics for applied coatings.
- Can be applied to porous and non-porous surfaces. A system to achieve 1 and 2 hour ratings.
- For other uses contact your distributor or corporate office
- Because it can be applied on most surfaces. FS-700™ solves many problems that must be addressed.
- Application rates: 1/8 inch= 30 min., 1/4 inch=1 hour, 1/2 inch= 2 hour resistance.
- Tested by Universal Protective Technologies under direct flame 2000 degrees.
- For commercial and residential use.
Universal Fire Shield™, Universal Protective Technologies are leaders dedicated to setting standards for fire prevention applications through our on going research and development. It is our resolve to educate and inform the architect, builder, manufacturer, fire officials, and the public.
Universal FS-700™ Trade Secret Formula
MSDS information:
This aqueous based resin compound mixed into other organic materials. Total Solids =89.1%, weight per gallon 9. I lbs., specific gravity = 1.33, PH factor =2.2-3.8, Flash Point Non-flammable, Color =light. red , Volatility= no petroleum or asbestos, Fungus= anti-fungus, Bacteria=mildly resistant, Linear shrinkage=sleight, Moisture absorption=None, Corrosion=low, Preservative=excellent,. These chemicals and compounds comply with all United States Federal Regulations. Meets or exceeds city, county and state codes. There are no EPA issues to date. No PBDE. For commercial and residential use.
Application procedure
Compound, putty, sealant and caulking. For large and small commercial building applications. Can be applied by hand trowel, grout bag. Works like putty. Allow to dry. Clean up as soon as possible, clean up equipment as soon as possible with water.
Non-toxic. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. If chemical gets into eyes wash out immediately flood with water. SAME PRECAUTIONS AS FOR ALL CHEMICALS AND PAINTS.
- One gallon and five gallon containers
- Manufactured & made in USA
Call office for additional information and prices.
Western Division: 1-888-290-3853
Eastern Division - 800-608-5699
