UNIFIRE-X THERMAL Coating for Metal and Firewall Protection™
UNIFIRE-X Thermal Coating F-10™ Space Age Technology
Now the number one fire retardant maker brings in a new class of fire retardant and thermal protection to meet the latest national fire codes for fire safety demands on metal, steel beams and assemblies.
UNIFIRE-X Thermal Coating F-10™ is manufactured in the USA. Helps meet MEA 411-03-M, ANS/UL 263, ASTM E119 and a host of assembly designs. Test after test by Universal Protective Technologies Labs show UNIFIRE-X Thermal Kote 10™ to be a Class A Thermal Coating meeting Class 1 and 2 ratings and the most practical solution to insulating against heat and flame. Better than fire rated gypsum board, better than most all other applications. Easier to handle, light weight and accessible where sheet rock is difficult to set. An exclusive aqueous based thermal protection product. Exclusive intumescent flame retardant combined with thermal insulation. No other product like this one.
Developed for the building trade to assist in meeting National Fire Codes now in force. UNIFIRE-X F-10™ can help reach the 1 and 2 hour ratings and more required by code enforcement in most areas. Steel beams, sheet metal, purlins, decks between floors and walls.
This unique compound of in-organic and organic materials and fire retardant chemicals makes it the best thermal fire retardant coating and insulator ever produced. It has low odor, environmentally safe, light weight and no problems with clean-up. Cleans up with water and soap if needed.
Untreated
Treated
Our exclusive formula with increased fire protection makes it the number one thermal coating insulator. Excellent qualities for ceilings, walls and steel beams and columns. Can be applied on sheet rock, galvanized steal, iron, wood and most all dry surfaces. (Note if applied to wood surface you may be required to treat the wood first with flame retardant for wood such as Wood Shield or Fire Kote 100) A textured finish application that can be left as is or can be painted after application.
APPLICATIONS: COMMERCIAL, INDUSTRIAL AND RESIDENTIAL
An exclusive formula flame and heat inhibiting mix and compound. A SUPERIOR GRADE. Thermal Insulator Coating rated Class “A”, Class I & II. Specifically formulated for maximum protection on ceilings and walls, steel beams and tank insulation where high fire and heat resistance is required. INTERIOR applications, meets and exceeds the surface burning characteristics for applied coatings. Can be applied to porous and non-porous surfaces. For other uses contact your distributor or corporate office. A system to achieve 1 and 2 hour ratings and more. Because being a Spray-On Application it can be applied on most surfaces and in hard to reach areas, UNIFIRE-X F-10™ solves many problems that must be addressed as a positive alternative to fire rated Gypsum.
This product is sold dry-mixed in 31 lb. bags, sold in large and small quantities. For large and small projects a dry ready to mix with water and our exclusive “fire retardant additives and curing agent”. .
Spread rate: Spread rate will depend on the measure of fire protection desired. Example, 3/16″ = 30 Minutes 3/8″ or more= up to 1 hour, 3/4″ or more = up to 2 hours. Heavier the coating higher the fire resistance and insulating factor. Spread rate: 3/8″ approx. 38 sq. ft. per bag of mix, 3/4″ 28 sq. ft. per bag of UNIFIRE-X F-10™ .
As to UL designs such as y726 or y727 you must apply the thickness as indicated as to that design. You can google any design number or UL numbers to find the actual thickness required for that test or design.
Sample texture
Applied by hopper, rotor type or plaster texture pump machine systems, portable augers and insulation type, typical for ceiling and wall textured compound applications. Can also be applied by hand trowel. As a fire stop can seal cabling, plumbing and other holes.
Structural Steel Fireproofing Systems
Products are tested to help meet ASTM E119, UL 263, UL 1479 and 1709 for interior structural fireproofing applications designs of structural steel members, decking, tanks and vessels. Can also be used for on wood structures after wood has been fire treated with Universal’s Wood Shield W-1000 or Fire Kote 100, helps meet ASTM-E 84, UL 1479, NFPA 255, UL 723, ASTM-E 84 is similar test as UL 263. This renders the wood non-combustible, and should be treated before Unifirex F-10 is applied.
Flame Spread=05
Smoke Develop=0
Resist black mold, mildew, fungi resistant. No solvents, halogens, asbestos or PBDE’s
PLEASE CALL FOR INFORMATION AND CURRENT PRICES.
UNIFIRE-X F-10™ Sales. a Division of UNISHIELD INTERNATIONAL, LLC
Eastern USA Division and Canada 1 800-608-5699
Western US Div. California Plant, 1-888-290-3853
